CDalloro

Here is a very useful guide to help you customize the Laurel Wreath for Graduation and fill in the pre-purchase phase. 

1. Satin Ribbon Colors:

Available colors not shown in the photo: cream, candy pink.

2. Type of bow on the back of the crown:

 Simple 2-tailed bow

 Simple bow with 4 tails

 2-tailed bow

 Bow Elaborated with 4 tails

 Two-tone bow

 2-tailed cockade bow

 4-tailed cockade bow

 Bow Elaborated in satin and tulle / organza

 Bow Elaborated with 2-tailed curls

 Bow Elaborated with 4-tail curls

 Bow with color scale (minimum 3) in cockade

3. Presence of 2 ribbons on the sides of the Crown:

               Otherwise

4. Adding the bead on the bow:

5. Adding the charms (four-leaf clover or red pepper and metal tassel):

6. Bow with dovetails or classic cut:

 Bow with dovetail cut

 Bow with classic cut

7. Types of Bridal Veil (also called gypsophila, mist, white flowers):

Natural wedding veil

Stabilized ivory wedding veil

White artificial wedding veil

Further information:

• The circumference should be taken with a tape measure by passing it over the ears and about mid / high forehead. The tape measure should not press or tighten, but it should be loosened. We invite you to give a correct measurement of the circumference to avoid problems later. We remind you that the crown must not pierce through the head, but must be supported, you decide whether horizontally or obliquely.
• To select different types of bows, colors or types of ribbons, contact us via whatsapp at +39 3333653399 or email cdalloro2@gmail.com .
• For any information we will be happy to help you. 

Thank you,

The CDAlloro team

Here is a very useful guide to help you customize your Graduation Favors and fill out the pre-purchase phase. 

1. The processing times for an order for Favors are 48 working hours.

At the end of these hours, we will be able to send the favors, which will be delivered to you in 1/3 working days. 

2. Typology of red cards, without parchment / with parchment. 

3. The internal hand lettering is free, if you prefer printing there will be a surcharge of € 15 on the total cost. After the purchase you will be contacted to define the font. With the printed text you can write anything you want (name, faculty, degree, title, date ..) as the space available will be greater. 

Further information:

• All the favors are handmade by us and can be customized in the type and color of the ribbons. 
• Types of ribbons available: satin, tulle, organza, checked, polka dot, with the word "graduation". 
• The favors with the painting can be customized to your liking. You will have to provide us with the drawing, we will make the draft and we will send you the free estimate.  
• For any information we will be happy to help you.

Thank you, 

The CDAlloro team

To create our compositions we use a particular white flower called Bride's Veil or more technically Gypsophila / Gipsofila. 

During the months between October and May we only use freshly cut wedding veil (unless you require the stabilized or artificial one). Due to the high summer temperatures of the months of June, July, August and September we propose one of the alternatives proposed, Stabilized or Artificial Wedding Veil. This is to ensure greater conservation and beauty of the final result of the crown.

The stabilized gypsophila is ivory in color and smaller than the natural one (it is not dry!), but it will remain so forever, unlike the natural one which dries after 2/3 days. 

If you have any doubts, feel free to contact us via the whatsapp button and request examples. 

The change is free, does not involve any surcharge and is carried out automatically. 

Here is a very useful guide to help you customize the Laurel Wreath for Graduation and fill in the pre-purchase phase. 

1. Satin Ribbon Colors:

Available colors not shown in the photo: cream, candy pink.

2. Type of bow on the back of the crown:

 Simple 2-tailed bow

 Simple bow with 4 tails

 2-tailed bow

 Bow Elaborated with 4 tails

 Two-tone bow

 2-tailed cockade bow

 4-tailed cockade bow

 Bow Elaborated in satin and tulle / organza

 Bow Elaborated with 2-tailed curls

 Bow Elaborated with 4-tail curls

 Bow with color scale (minimum 3) in cockade

3. Presence of 2 ribbons on the sides of the Crown:

               Otherwise

4. Adding the bead on the bow:

5. Adding the charms (four-leaf clover or red pepper and metal tassel):

6. Bow with dovetails or classic cut:

 Bow with dovetail cut

 Bow with classic cut

7. Types of Bridal Veil (also called gypsophila, mist, white flowers):

Natural wedding veil

Stabilized ivory wedding veil

White artificial wedding veil

Further information:

• The circumference should be taken with a tape measure by passing it over the ears and about mid / high forehead. The tape measure should not press or tighten, but it should be loosened. We invite you to give a correct measurement of the circumference to avoid problems later. We remind you that the crown must not pierce through the head, but must be supported, you decide whether horizontally or obliquely.
• To select different types of bows, colors or types of ribbons, contact us via whatsapp at +39 3333653399 or email cdalloro2@gmail.com .
• For any information we will be happy to help you. 

Thank you,

The CDAlloro team

Here is a very useful guide to help you customize your Graduation Favors and fill out the pre-purchase phase. 

1. The processing times for an order for Favors are 48 working hours.

At the end of these hours, we will be able to send the favors, which will be delivered to you in 1/3 working days. 

2. Typology of red cards, without parchment / with parchment. 

3. The internal hand lettering is free, if you prefer printing there will be a surcharge of € 15 on the total cost. After the purchase you will be contacted to define the font. With the printed text you can write anything you want (name, faculty, degree, title, date ..) as the space available will be greater. 

Further information:

• All the favors are handmade by us and can be customized in the type and color of the ribbons. 
• Types of ribbons available: satin, tulle, organza, checked, polka dot, with the word "graduation". 
• The favors with the painting can be customized to your liking. You will have to provide us with the drawing, we will make the draft and we will send you the free estimate.  
• For any information we will be happy to help you.

Thank you, 

The CDAlloro team

To create our compositions we use a particular white flower called Bride's Veil or more technically Gypsophila / Gipsofila. 

During the months between October and May we only use freshly cut wedding veil (unless you require the stabilized or artificial one). Due to the high summer temperatures of the months of June, July, August and September we propose one of the alternatives proposed, Stabilized or Artificial Wedding Veil. This is to ensure greater conservation and beauty of the final result of the crown.

The stabilized gypsophila is ivory in color and smaller than the natural one (it is not dry!), but it will remain so forever, unlike the natural one which dries after 2/3 days. 

If you have any doubts, feel free to contact us via the whatsapp button and request examples. 

The change is free, does not involve any surcharge and is carried out automatically. 

Here is a very useful guide to help you customize the Laurel Wreath for Graduation and fill in the pre-purchase phase. 

1. Satin Ribbon Colors:

Available colors not shown in the photo: cream, candy pink.

2. Type of bow on the back of the crown:

 Simple 2-tailed bow

 Simple bow with 4 tails

 2-tailed bow

 Bow Elaborated with 4 tails

 Two-tone bow

 2-tailed cockade bow

 4-tailed cockade bow

 Bow Elaborated in satin and tulle / organza

 Bow Elaborated with 2-tailed curls

 Bow Elaborated with 4-tail curls

 Bow with color scale (minimum 3) in cockade

3. Presence of 2 ribbons on the sides of the Crown:

               Otherwise

4. Adding the bead on the bow:

5. Adding the charms (four-leaf clover or red pepper and metal tassel):

6. Bow with dovetails or classic cut:

 Bow with dovetail cut

 Bow with classic cut

7. Types of Bridal Veil (also called gypsophila, mist, white flowers):

Natural wedding veil

Stabilized ivory wedding veil

White artificial wedding veil

Further information:

• The circumference should be taken with a tape measure by passing it over the ears and about mid / high forehead. The tape measure should not press or tighten, but it should be loosened. We invite you to give a correct measurement of the circumference to avoid problems later. We remind you that the crown must not pierce through the head, but must be supported, you decide whether horizontally or obliquely.
• To select different types of bows, colors or types of ribbons, contact us via whatsapp at +39 3333653399 or email cdalloro2@gmail.com .
• For any information we will be happy to help you. 

Thank you,

The CDAlloro team

Here is a very useful guide to help you customize your Graduation Favors and fill out the pre-purchase phase. 

1. The processing times for an order for Favors are 48 working hours.

At the end of these hours, we will be able to send the favors, which will be delivered to you in 1/3 working days. 

2. Typology of red cards, without parchment / with parchment. 

3. The internal hand lettering is free, if you prefer printing there will be a surcharge of € 15 on the total cost. After the purchase you will be contacted to define the font. With the printed text you can write anything you want (name, faculty, degree, title, date ..) as the space available will be greater. 

Further information:

• All the favors are handmade by us and can be customized in the type and color of the ribbons. 
• Types of ribbons available: satin, tulle, organza, checked, polka dot, with the word "graduation". 
• The favors with the painting can be customized to your liking. You will have to provide us with the drawing, we will make the draft and we will send you the free estimate.  
• For any information we will be happy to help you.

Thank you, 

The CDAlloro team

To create our compositions we use a particular white flower called Bride's Veil or more technically Gypsophila / Gipsofila. 

During the months between October and May we only use freshly cut wedding veil (unless you require the stabilized or artificial one). Due to the high summer temperatures of the months of June, July, August and September we propose one of the alternatives proposed, Stabilized or Artificial Wedding Veil. This is to ensure greater conservation and beauty of the final result of the crown.

The stabilized gypsophila is ivory in color and smaller than the natural one (it is not dry!), but it will remain so forever, unlike the natural one which dries after 2/3 days. 

If you have any doubts, feel free to contact us via the whatsapp button and request examples. 

The change is free, does not involve any surcharge and is carried out automatically. 

Here is a very useful guide to help you customize the Laurel Wreath for Graduation and fill in the pre-purchase phase. 

1. Satin Ribbon Colors:

Available colors not shown in the photo: cream, candy pink.

2. Type of bow on the back of the crown:

 Simple 2-tailed bow

 Simple bow with 4 tails

 2-tailed bow

 Bow Elaborated with 4 tails

 Two-tone bow

 2-tailed cockade bow

 4-tailed cockade bow

 Bow Elaborated in satin and tulle / organza

 Bow Elaborated with 2-tailed curls

 Bow Elaborated with 4-tail curls

 Bow with color scale (minimum 3) in cockade

3. Presence of 2 ribbons on the sides of the Crown:

               Otherwise

4. Adding the bead on the bow:

5. Adding the charms (four-leaf clover or red pepper and metal tassel):

6. Bow with dovetails or classic cut:

 Bow with dovetail cut

 Bow with classic cut

7. Types of Bridal Veil (also called gypsophila, mist, white flowers):

Natural wedding veil

Stabilized ivory wedding veil

White artificial wedding veil

Further information:

• The circumference should be taken with a tape measure by passing it over the ears and about mid / high forehead. The tape measure should not press or tighten, but it should be loosened. We invite you to give a correct measurement of the circumference to avoid problems later. We remind you that the crown must not pierce through the head, but must be supported, you decide whether horizontally or obliquely.
• To select different types of bows, colors or types of ribbons, contact us via whatsapp at +39 3333653399 or email cdalloro2@gmail.com .
• For any information we will be happy to help you. 

Thank you,

The CDAlloro team

Here is a very useful guide to help you customize your Graduation Favors and fill out the pre-purchase phase. 

1. The processing times for an order for Favors are 48 working hours.

At the end of these hours, we will be able to send the favors, which will be delivered to you in 1/3 working days. 

2. Typology of red cards, without parchment / with parchment. 

3. The internal hand lettering is free, if you prefer printing there will be a surcharge of € 15 on the total cost. After the purchase you will be contacted to define the font. With the printed text you can write anything you want (name, faculty, degree, title, date ..) as the space available will be greater. 

Further information:

• All the favors are handmade by us and can be customized in the type and color of the ribbons. 
• Types of ribbons available: satin, tulle, organza, checked, polka dot, with the word "graduation". 
• The favors with the painting can be customized to your liking. You will have to provide us with the drawing, we will make the draft and we will send you the free estimate.  
• For any information we will be happy to help you.

Thank you, 

The CDAlloro team

To create our compositions we use a particular white flower called Bride's Veil or more technically Gypsophila / Gipsofila. 

During the months between October and May we only use freshly cut wedding veil (unless you require the stabilized or artificial one). Due to the high summer temperatures of the months of June, July, August and September we propose one of the alternatives proposed, Stabilized or Artificial Wedding Veil. This is to ensure greater conservation and beauty of the final result of the crown.

The stabilized gypsophila is ivory in color and smaller than the natural one (it is not dry!), but it will remain so forever, unlike the natural one which dries after 2/3 days. 

If you have any doubts, feel free to contact us via the whatsapp button and request examples. 

The change is free, does not involve any surcharge and is carried out automatically. 

Here is a very useful guide to help you customize the Laurel Wreath for Graduation and fill in the pre-purchase phase. 

1. Satin Ribbon Colors:

Available colors not shown in the photo: cream, candy pink.

2. Type of bow on the back of the crown:

 Simple 2-tailed bow

 Simple bow with 4 tails

 2-tailed bow

 Bow Elaborated with 4 tails

 Two-tone bow

 2-tailed cockade bow

 4-tailed cockade bow

 Bow Elaborated in satin and tulle / organza

 Bow Elaborated with 2-tailed curls

 Bow Elaborated with 4-tail curls

 Bow with color scale (minimum 3) in cockade

3. Presence of 2 ribbons on the sides of the Crown:

               Otherwise

4. Adding the bead on the bow:

5. Adding the charms (four-leaf clover or red pepper and metal tassel):

6. Bow with dovetails or classic cut:

 Bow with dovetail cut

 Bow with classic cut

7. Types of Bridal Veil (also called gypsophila, mist, white flowers):

Natural wedding veil

Stabilized ivory wedding veil

White artificial wedding veil

Further information:

• The circumference should be taken with a tape measure by passing it over the ears and about mid / high forehead. The tape measure should not press or tighten, but it should be loosened. We invite you to give a correct measurement of the circumference to avoid problems later. We remind you that the crown must not pierce through the head, but must be supported, you decide whether horizontally or obliquely.
• To select different types of bows, colors or types of ribbons, contact us via whatsapp at +39 3333653399 or email cdalloro2@gmail.com .
• For any information we will be happy to help you. 

Thank you,

The CDAlloro team

Here is a very useful guide to help you customize your Graduation Favors and fill out the pre-purchase phase. 

1. The processing times for an order for Favors are 48 working hours.

At the end of these hours, we will be able to send the favors, which will be delivered to you in 1/3 working days. 

2. Typology of red cards, without parchment / with parchment. 

3. The internal hand lettering is free, if you prefer printing there will be a surcharge of € 15 on the total cost. After the purchase you will be contacted to define the font. With the printed text you can write anything you want (name, faculty, degree, title, date ..) as the space available will be greater. 

Further information:

• All the favors are handmade by us and can be customized in the type and color of the ribbons. 
• Types of ribbons available: satin, tulle, organza, checked, polka dot, with the word "graduation". 
• The favors with the painting can be customized to your liking. You will have to provide us with the drawing, we will make the draft and we will send you the free estimate.  
• For any information we will be happy to help you.

Thank you, 

The CDAlloro team

To create our compositions we use a particular white flower called Bride's Veil or more technically Gypsophila / Gipsofila. 

During the months between October and May we only use freshly cut wedding veil (unless you require the stabilized or artificial one). Due to the high summer temperatures of the months of June, July, August and September we propose one of the alternatives proposed, Stabilized or Artificial Wedding Veil. This is to ensure greater conservation and beauty of the final result of the crown.

The stabilized gypsophila is ivory in color and smaller than the natural one (it is not dry!), but it will remain so forever, unlike the natural one which dries after 2/3 days. 

If you have any doubts, feel free to contact us via the whatsapp button and request examples. 

The change is free, does not involve any surcharge and is carried out automatically. 

Here is a very useful guide to help you customize the Laurel Wreath for Graduation and fill in the pre-purchase phase. 

1. Satin Ribbon Colors:

Available colors not shown in the photo: cream, candy pink.

2. Type of bow on the back of the crown:

 Simple 2-tailed bow

 Simple bow with 4 tails

 2-tailed bow

 Bow Elaborated with 4 tails

 Two-tone bow

 2-tailed cockade bow

 4-tailed cockade bow

 Bow Elaborated in satin and tulle / organza

 Bow Elaborated with 2-tailed curls

 Bow Elaborated with 4-tail curls

 Bow with color scale (minimum 3) in cockade

3. Presence of 2 ribbons on the sides of the Crown:

               Otherwise

4. Adding the bead on the bow:

5. Adding the charms (four-leaf clover or red pepper and metal tassel):

6. Bow with dovetails or classic cut:

 Bow with dovetail cut

 Bow with classic cut

7. Types of Bridal Veil (also called gypsophila, mist, white flowers):

Natural wedding veil

Stabilized ivory wedding veil

White artificial wedding veil

Further information:

• The circumference should be taken with a tape measure by passing it over the ears and about mid / high forehead. The tape measure should not press or tighten, but it should be loosened. We invite you to give a correct measurement of the circumference to avoid problems later. We remind you that the crown must not pierce through the head, but must be supported, you decide whether horizontally or obliquely.
• To select different types of bows, colors or types of ribbons, contact us via whatsapp at +39 3333653399 or email cdalloro2@gmail.com .
• For any information we will be happy to help you. 

Thank you,

The CDAlloro team

Here is a very useful guide to help you customize your Graduation Favors and fill out the pre-purchase phase. 

1. The processing times for an order for Favors are 48 working hours.

At the end of these hours, we will be able to send the favors, which will be delivered to you in 1/3 working days. 

2. Typology of red cards, without parchment / with parchment. 

3. The internal hand lettering is free, if you prefer printing there will be a surcharge of € 15 on the total cost. After the purchase you will be contacted to define the font. With the printed text you can write anything you want (name, faculty, degree, title, date ..) as the space available will be greater. 

Further information:

• All the favors are handmade by us and can be customized in the type and color of the ribbons. 
• Types of ribbons available: satin, tulle, organza, checked, polka dot, with the word "graduation". 
• The favors with the painting can be customized to your liking. You will have to provide us with the drawing, we will make the draft and we will send you the free estimate.  
• For any information we will be happy to help you.

Thank you, 

The CDAlloro team

To create our compositions we use a particular white flower called Bride's Veil or more technically Gypsophila / Gipsofila. 

During the months between October and May we only use freshly cut wedding veil (unless you require the stabilized or artificial one). Due to the high summer temperatures of the months of June, July, August and September we propose one of the alternatives proposed, Stabilized or Artificial Wedding Veil. This is to ensure greater conservation and beauty of the final result of the crown.

The stabilized gypsophila is ivory in color and smaller than the natural one (it is not dry!), but it will remain so forever, unlike the natural one which dries after 2/3 days. 

If you have any doubts, feel free to contact us via the whatsapp button and request examples. 

The change is free, does not involve any surcharge and is carried out automatically. 

Here is a very useful guide to help you customize the Laurel Wreath for Graduation and fill in the pre-purchase phase. 

1. Satin Ribbon Colors:

Available colors not shown in the photo: cream, candy pink.

2. Type of bow on the back of the crown:

 Simple 2-tailed bow

 Simple bow with 4 tails

 2-tailed bow

 Bow Elaborated with 4 tails

 Two-tone bow

 2-tailed cockade bow

 4-tailed cockade bow

 Bow Elaborated in satin and tulle / organza

 Bow Elaborated with 2-tailed curls

 Bow Elaborated with 4-tail curls

 Bow with color scale (minimum 3) in cockade

3. Presence of 2 ribbons on the sides of the Crown:

               Otherwise

4. Adding the bead on the bow:

5. Adding the charms (four-leaf clover or red pepper and metal tassel):

6. Bow with dovetails or classic cut:

 Bow with dovetail cut

 Bow with classic cut

7. Types of Bridal Veil (also called gypsophila, mist, white flowers):

Natural wedding veil

Stabilized ivory wedding veil

White artificial wedding veil

Further information:

• The circumference should be taken with a tape measure by passing it over the ears and about mid / high forehead. The tape measure should not press or tighten, but it should be loosened. We invite you to give a correct measurement of the circumference to avoid problems later. We remind you that the crown must not pierce through the head, but must be supported, you decide whether horizontally or obliquely.
• To select different types of bows, colors or types of ribbons, contact us via whatsapp at +39 3333653399 or email cdalloro2@gmail.com .
• For any information we will be happy to help you. 

Thank you,

The CDAlloro team

Here is a very useful guide to help you customize your Graduation Favors and fill out the pre-purchase phase. 

1. The processing times for an order for Favors are 48 working hours.

At the end of these hours, we will be able to send the favors, which will be delivered to you in 1/3 working days. 

2. Typology of red cards, without parchment / with parchment. 

3. The internal hand lettering is free, if you prefer printing there will be a surcharge of € 15 on the total cost. After the purchase you will be contacted to define the font. With the printed text you can write anything you want (name, faculty, degree, title, date ..) as the space available will be greater. 

Further information:

• All the favors are handmade by us and can be customized in the type and color of the ribbons. 
• Types of ribbons available: satin, tulle, organza, checked, polka dot, with the word "graduation". 
• The favors with the painting can be customized to your liking. You will have to provide us with the drawing, we will make the draft and we will send you the free estimate.  
• For any information we will be happy to help you.

Thank you, 

The CDAlloro team

To create our compositions we use a particular white flower called Bride's Veil or more technically Gypsophila / Gipsofila. 

During the months between October and May we only use freshly cut wedding veil (unless you require the stabilized or artificial one). Due to the high summer temperatures of the months of June, July, August and September we propose one of the alternatives proposed, Stabilized or Artificial Wedding Veil. This is to ensure greater conservation and beauty of the final result of the crown.

The stabilized gypsophila is ivory in color and smaller than the natural one (it is not dry!), but it will remain so forever, unlike the natural one which dries after 2/3 days. 

If you have any doubts, feel free to contact us via the whatsapp button and request examples. 

The change is free, does not involve any surcharge and is carried out automatically. 

Here is a very useful guide to help you customize the Laurel Wreath for Graduation and fill in the pre-purchase phase. 

1. Satin Ribbon Colors:

Available colors not shown in the photo: cream, candy pink.

2. Type of bow on the back of the crown:

 Simple 2-tailed bow

 Simple bow with 4 tails

 2-tailed bow

 Bow Elaborated with 4 tails

 Two-tone bow

 2-tailed cockade bow

 4-tailed cockade bow

 Bow Elaborated in satin and tulle / organza

 Bow Elaborated with 2-tailed curls

 Bow Elaborated with 4-tail curls

 Bow with color scale (minimum 3) in cockade

3. Presence of 2 ribbons on the sides of the Crown:

               Otherwise

4. Adding the bead on the bow:

5. Adding the charms (four-leaf clover or red pepper and metal tassel):

6. Bow with dovetails or classic cut:

 Bow with dovetail cut

 Bow with classic cut

7. Types of Bridal Veil (also called gypsophila, mist, white flowers):

Natural wedding veil

Stabilized ivory wedding veil

White artificial wedding veil

Further information:

• The circumference should be taken with a tape measure by passing it over the ears and about mid / high forehead. The tape measure should not press or tighten, but it should be loosened. We invite you to give a correct measurement of the circumference to avoid problems later. We remind you that the crown must not pierce through the head, but must be supported, you decide whether horizontally or obliquely.
• To select different types of bows, colors or types of ribbons, contact us via whatsapp at +39 3333653399 or email cdalloro2@gmail.com .
• For any information we will be happy to help you. 

Thank you,

The CDAlloro team

Here is a very useful guide to help you customize your Graduation Favors and fill out the pre-purchase phase. 

1. The processing times for an order for Favors are 48 working hours.

At the end of these hours, we will be able to send the favors, which will be delivered to you in 1/3 working days. 

2. Typology of red cards, without parchment / with parchment. 

3. The internal hand lettering is free, if you prefer printing there will be a surcharge of € 15 on the total cost. After the purchase you will be contacted to define the font. With the printed text you can write anything you want (name, faculty, degree, title, date ..) as the space available will be greater. 

Further information:

• All the favors are handmade by us and can be customized in the type and color of the ribbons. 
• Types of ribbons available: satin, tulle, organza, checked, polka dot, with the word "graduation". 
• The favors with the painting can be customized to your liking. You will have to provide us with the drawing, we will make the draft and we will send you the free estimate.  
• For any information we will be happy to help you.

Thank you, 

The CDAlloro team

To create our compositions we use a particular white flower called Bride's Veil or more technically Gypsophila / Gipsofila. 

During the months between October and May we only use freshly cut wedding veil (unless you require the stabilized or artificial one). Due to the high summer temperatures of the months of June, July, August and September we propose one of the alternatives proposed, Stabilized or Artificial Wedding Veil. This is to ensure greater conservation and beauty of the final result of the crown.

The stabilized gypsophila is ivory in color and smaller than the natural one (it is not dry!), but it will remain so forever, unlike the natural one which dries after 2/3 days. 

If you have any doubts, feel free to contact us via the whatsapp button and request examples. 

The change is free, does not involve any surcharge and is carried out automatically. 

Here is a very useful guide to help you customize the Laurel Wreath for Graduation and fill in the pre-purchase phase. 

1. Satin Ribbon Colors:

Available colors not shown in the photo: cream, candy pink.

2. Type of bow on the back of the crown:

 Simple 2-tailed bow

 Simple bow with 4 tails

 2-tailed bow

 Bow Elaborated with 4 tails

 Two-tone bow

 2-tailed cockade bow

 4-tailed cockade bow

 Bow Elaborated in satin and tulle / organza

 Bow Elaborated with 2-tailed curls

 Bow Elaborated with 4-tail curls

 Bow with color scale (minimum 3) in cockade

3. Presence of 2 ribbons on the sides of the Crown:

               Otherwise

4. Adding the bead on the bow:

5. Adding the charms (four-leaf clover or red pepper and metal tassel):

6. Bow with dovetails or classic cut:

 Bow with dovetail cut

 Bow with classic cut

7. Types of Bridal Veil (also called gypsophila, mist, white flowers):

Natural wedding veil

Stabilized ivory wedding veil

White artificial wedding veil

Further information:

• The circumference should be taken with a tape measure by passing it over the ears and about mid / high forehead. The tape measure should not press or tighten, but it should be loosened. We invite you to give a correct measurement of the circumference to avoid problems later. We remind you that the crown must not pierce through the head, but must be supported, you decide whether horizontally or obliquely.
• To select different types of bows, colors or types of ribbons, contact us via whatsapp at +39 3333653399 or email cdalloro2@gmail.com .
• For any information we will be happy to help you. 

Thank you,

The CDAlloro team

Here is a very useful guide to help you customize your Graduation Favors and fill out the pre-purchase phase. 

1. The processing times for an order for Favors are 48 working hours.

At the end of these hours, we will be able to send the favors, which will be delivered to you in 1/3 working days. 

2. Typology of red cards, without parchment / with parchment. 

3. The internal hand lettering is free, if you prefer printing there will be a surcharge of € 15 on the total cost. After the purchase you will be contacted to define the font. With the printed text you can write anything you want (name, faculty, degree, title, date ..) as the space available will be greater. 

Further information:

• All the favors are handmade by us and can be customized in the type and color of the ribbons. 
• Types of ribbons available: satin, tulle, organza, checked, polka dot, with the word "graduation". 
• The favors with the painting can be customized to your liking. You will have to provide us with the drawing, we will make the draft and we will send you the free estimate.  
• For any information we will be happy to help you.

Thank you, 

The CDAlloro team

To create our compositions we use a particular white flower called Bride's Veil or more technically Gypsophila / Gipsofila. 

During the months between October and May we only use freshly cut wedding veil (unless you require the stabilized or artificial one). Due to the high summer temperatures of the months of June, July, August and September we propose one of the alternatives proposed, Stabilized or Artificial Wedding Veil. This is to ensure greater conservation and beauty of the final result of the crown.

The stabilized gypsophila is ivory in color and smaller than the natural one (it is not dry!), but it will remain so forever, unlike the natural one which dries after 2/3 days. 

If you have any doubts, feel free to contact us via the whatsapp button and request examples. 

The change is free, does not involve any surcharge and is carried out automatically. 

Here is a very useful guide to help you customize the Laurel Wreath for Graduation and fill in the pre-purchase phase. 

1. Satin Ribbon Colors:

Available colors not shown in the photo: cream, candy pink.

2. Type of bow on the back of the crown:

 Simple 2-tailed bow

 Simple bow with 4 tails

 2-tailed bow

 Bow Elaborated with 4 tails

 Two-tone bow

 2-tailed cockade bow

 4-tailed cockade bow

 Bow Elaborated in satin and tulle / organza

 Bow Elaborated with 2-tailed curls

 Bow Elaborated with 4-tail curls

 Bow with color scale (minimum 3) in cockade

3. Presence of 2 ribbons on the sides of the Crown:

               Otherwise

4. Adding the bead on the bow:

5. Adding the charms (four-leaf clover or red pepper and metal tassel):

6. Bow with dovetails or classic cut:

 Bow with dovetail cut

 Bow with classic cut

7. Types of Bridal Veil (also called gypsophila, mist, white flowers):

Natural wedding veil

Stabilized ivory wedding veil

White artificial wedding veil

Further information:

• The circumference should be taken with a tape measure by passing it over the ears and about mid / high forehead. The tape measure should not press or tighten, but it should be loosened. We invite you to give a correct measurement of the circumference to avoid problems later. We remind you that the crown must not pierce through the head, but must be supported, you decide whether horizontally or obliquely.
• To select different types of bows, colors or types of ribbons, contact us via whatsapp at +39 3333653399 or email cdalloro2@gmail.com .
• For any information we will be happy to help you. 

Thank you,

The CDAlloro team

Here is a very useful guide to help you customize your Graduation Favors and fill out the pre-purchase phase. 

1. The processing times for an order for Favors are 48 working hours.

At the end of these hours, we will be able to send the favors, which will be delivered to you in 1/3 working days. 

2. Typology of red cards, without parchment / with parchment. 

3. The internal hand lettering is free, if you prefer printing there will be a surcharge of € 15 on the total cost. After the purchase you will be contacted to define the font. With the printed text you can write anything you want (name, faculty, degree, title, date ..) as the space available will be greater. 

Further information:

• All the favors are handmade by us and can be customized in the type and color of the ribbons. 
• Types of ribbons available: satin, tulle, organza, checked, polka dot, with the word "graduation". 
• The favors with the painting can be customized to your liking. You will have to provide us with the drawing, we will make the draft and we will send you the free estimate.  
• For any information we will be happy to help you.

Thank you, 

The CDAlloro team

To create our compositions we use a particular white flower called Bride's Veil or more technically Gypsophila / Gipsofila. 

During the months between October and May we only use freshly cut wedding veil (unless you require the stabilized or artificial one). Due to the high summer temperatures of the months of June, July, August and September we propose one of the alternatives proposed, Stabilized or Artificial Wedding Veil. This is to ensure greater conservation and beauty of the final result of the crown.

The stabilized gypsophila is ivory in color and smaller than the natural one (it is not dry!), but it will remain so forever, unlike the natural one which dries after 2/3 days. 

If you have any doubts, feel free to contact us via the whatsapp button and request examples. 

The change is free, does not involve any surcharge and is carried out automatically. 

Here is a very useful guide to help you customize the Laurel Wreath for Graduation and fill in the pre-purchase phase. 

1. Satin Ribbon Colors:

Available colors not shown in the photo: cream, candy pink.

2. Type of bow on the back of the crown:

 Simple 2-tailed bow

 Simple bow with 4 tails

 2-tailed bow

 Bow Elaborated with 4 tails

 Two-tone bow

 2-tailed cockade bow

 4-tailed cockade bow

 Bow Elaborated in satin and tulle / organza

 Bow Elaborated with 2-tailed curls

 Bow Elaborated with 4-tail curls

 Bow with color scale (minimum 3) in cockade

3. Presence of 2 ribbons on the sides of the Crown:

               Otherwise

4. Adding the bead on the bow:

5. Adding the charms (four-leaf clover or red pepper and metal tassel):

6. Bow with dovetails or classic cut:

 Bow with dovetail cut

 Bow with classic cut

7. Types of Bridal Veil (also called gypsophila, mist, white flowers):

Natural wedding veil

Stabilized ivory wedding veil

White artificial wedding veil

Further information:

• The circumference should be taken with a tape measure by passing it over the ears and about mid / high forehead. The tape measure should not press or tighten, but it should be loosened. We invite you to give a correct measurement of the circumference to avoid problems later. We remind you that the crown must not pierce through the head, but must be supported, you decide whether horizontally or obliquely.
• To select different types of bows, colors or types of ribbons, contact us via whatsapp at +39 3333653399 or email cdalloro2@gmail.com .
• For any information we will be happy to help you. 

Thank you,

The CDAlloro team

Here is a very useful guide to help you customize your Graduation Favors and fill out the pre-purchase phase. 

1. The processing times for an order for Favors are 48 working hours.

At the end of these hours, we will be able to send the favors, which will be delivered to you in 1/3 working days. 

2. Typology of red cards, without parchment / with parchment. 

3. The internal hand lettering is free, if you prefer printing there will be a surcharge of € 15 on the total cost. After the purchase you will be contacted to define the font. With the printed text you can write anything you want (name, faculty, degree, title, date ..) as the space available will be greater. 

Further information:

• All the favors are handmade by us and can be customized in the type and color of the ribbons. 
• Types of ribbons available: satin, tulle, organza, checked, polka dot, with the word "graduation". 
• The favors with the painting can be customized to your liking. You will have to provide us with the drawing, we will make the draft and we will send you the free estimate.  
• For any information we will be happy to help you.

Thank you, 

The CDAlloro team

To create our compositions we use a particular white flower called Bride's Veil or more technically Gypsophila / Gipsofila. 

During the months between October and May we only use freshly cut wedding veil (unless you require the stabilized or artificial one). Due to the high summer temperatures of the months of June, July, August and September we propose one of the alternatives proposed, Stabilized or Artificial Wedding Veil. This is to ensure greater conservation and beauty of the final result of the crown.

The stabilized gypsophila is ivory in color and smaller than the natural one (it is not dry!), but it will remain so forever, unlike the natural one which dries after 2/3 days. 

If you have any doubts, feel free to contact us via the whatsapp button and request examples. 

The change is free, does not involve any surcharge and is carried out automatically. 

Here is a very useful guide to help you customize the Laurel Wreath for Graduation and fill in the pre-purchase phase. 

1. Satin Ribbon Colors:

Available colors not shown in the photo: cream, candy pink.

2. Type of bow on the back of the crown:

 Simple 2-tailed bow

 Simple bow with 4 tails

 2-tailed bow

 Bow Elaborated with 4 tails

 Two-tone bow

 2-tailed cockade bow

 4-tailed cockade bow

 Bow Elaborated in satin and tulle / organza

 Bow Elaborated with 2-tailed curls

 Bow Elaborated with 4-tail curls

 Bow with color scale (minimum 3) in cockade

3. Presence of 2 ribbons on the sides of the Crown:

               Otherwise

4. Adding the bead on the bow:

5. Adding the charms (four-leaf clover or red pepper and metal tassel):

6. Bow with dovetails or classic cut:

 Bow with dovetail cut

 Bow with classic cut

7. Types of Bridal Veil (also called gypsophila, mist, white flowers):

Natural wedding veil

Stabilized ivory wedding veil

White artificial wedding veil

Further information:

• The circumference should be taken with a tape measure by passing it over the ears and about mid / high forehead. The tape measure should not press or tighten, but it should be loosened. We invite you to give a correct measurement of the circumference to avoid problems later. We remind you that the crown must not pierce through the head, but must be supported, you decide whether horizontally or obliquely.
• To select different types of bows, colors or types of ribbons, contact us via whatsapp at +39 3333653399 or email cdalloro2@gmail.com .
• For any information we will be happy to help you. 

Thank you,

The CDAlloro team

Here is a very useful guide to help you customize your Graduation Favors and fill out the pre-purchase phase. 

1. The processing times for an order for Favors are 48 working hours.

At the end of these hours, we will be able to send the favors, which will be delivered to you in 1/3 working days. 

2. Typology of red cards, without parchment / with parchment. 

3. The internal hand lettering is free, if you prefer printing there will be a surcharge of € 15 on the total cost. After the purchase you will be contacted to define the font. With the printed text you can write anything you want (name, faculty, degree, title, date ..) as the space available will be greater. 

Further information:

• All the favors are handmade by us and can be customized in the type and color of the ribbons. 
• Types of ribbons available: satin, tulle, organza, checked, polka dot, with the word "graduation". 
• The favors with the painting can be customized to your liking. You will have to provide us with the drawing, we will make the draft and we will send you the free estimate.  
• For any information we will be happy to help you.

Thank you, 

The CDAlloro team

To create our compositions we use a particular white flower called Bride's Veil or more technically Gypsophila / Gipsofila. 

During the months between October and May we only use freshly cut wedding veil (unless you require the stabilized or artificial one). Due to the high summer temperatures of the months of June, July, August and September we propose one of the alternatives proposed, Stabilized or Artificial Wedding Veil. This is to ensure greater conservation and beauty of the final result of the crown.

The stabilized gypsophila is ivory in color and smaller than the natural one (it is not dry!), but it will remain so forever, unlike the natural one which dries after 2/3 days. 

If you have any doubts, feel free to contact us via the whatsapp button and request examples. 

The change is free, does not involve any surcharge and is carried out automatically. 

Here is a very useful guide to help you customize the Laurel Wreath for Graduation and fill in the pre-purchase phase. 

1. Satin Ribbon Colors:

Available colors not shown in the photo: cream, candy pink.

2. Type of bow on the back of the crown:

 Simple 2-tailed bow

 Simple bow with 4 tails

 2-tailed bow

 Bow Elaborated with 4 tails

 Two-tone bow

 2-tailed cockade bow

 4-tailed cockade bow

 Bow Elaborated in satin and tulle / organza

 Bow Elaborated with 2-tailed curls

 Bow Elaborated with 4-tail curls

 Bow with color scale (minimum 3) in cockade

3. Presence of 2 ribbons on the sides of the Crown:

               Otherwise

4. Adding the bead on the bow:

5. Adding the charms (four-leaf clover or red pepper and metal tassel):

6. Bow with dovetails or classic cut:

 Bow with dovetail cut

 Bow with classic cut

7. Types of Bridal Veil (also called gypsophila, mist, white flowers):

Natural wedding veil

Stabilized ivory wedding veil

White artificial wedding veil

Further information:

• The circumference should be taken with a tape measure by passing it over the ears and about mid / high forehead. The tape measure should not press or tighten, but it should be loosened. We invite you to give a correct measurement of the circumference to avoid problems later. We remind you that the crown must not pierce through the head, but must be supported, you decide whether horizontally or obliquely.
• To select different types of bows, colors or types of ribbons, contact us via whatsapp at +39 3333653399 or email cdalloro2@gmail.com .
• For any information we will be happy to help you. 

Thank you,

The CDAlloro team

Here is a very useful guide to help you customize your Graduation Favors and fill out the pre-purchase phase. 

1. The processing times for an order for Favors are 48 working hours.

At the end of these hours, we will be able to send the favors, which will be delivered to you in 1/3 working days. 

2. Typology of red cards, without parchment / with parchment. 

3. The internal hand lettering is free, if you prefer printing there will be a surcharge of € 15 on the total cost. After the purchase you will be contacted to define the font. With the printed text you can write anything you want (name, faculty, degree, title, date ..) as the space available will be greater. 

Further information:

• All the favors are handmade by us and can be customized in the type and color of the ribbons. 
• Types of ribbons available: satin, tulle, organza, checked, polka dot, with the word "graduation". 
• The favors with the painting can be customized to your liking. You will have to provide us with the drawing, we will make the draft and we will send you the free estimate.  
• For any information we will be happy to help you.

Thank you, 

The CDAlloro team

To create our compositions we use a particular white flower called Bride's Veil or more technically Gypsophila / Gipsofila. 

During the months between October and May we only use freshly cut wedding veil (unless you require the stabilized or artificial one). Due to the high summer temperatures of the months of June, July, August and September we propose one of the alternatives proposed, Stabilized or Artificial Wedding Veil. This is to ensure greater conservation and beauty of the final result of the crown.

The stabilized gypsophila is ivory in color and smaller than the natural one (it is not dry!), but it will remain so forever, unlike the natural one which dries after 2/3 days. 

If you have any doubts, feel free to contact us via the whatsapp button and request examples. 

The change is free, does not involve any surcharge and is carried out automatically. 

Here is a very useful guide to help you customize the Laurel Wreath for Graduation and fill in the pre-purchase phase. 

1. Satin Ribbon Colors:

Available colors not shown in the photo: cream, candy pink.

2. Type of bow on the back of the crown:

 Simple 2-tailed bow

 Simple bow with 4 tails

 2-tailed bow

 Bow Elaborated with 4 tails

 Two-tone bow

 2-tailed cockade bow

 4-tailed cockade bow

 Bow Elaborated in satin and tulle / organza

 Bow Elaborated with 2-tailed curls

 Bow Elaborated with 4-tail curls

 Bow with color scale (minimum 3) in cockade

3. Presence of 2 ribbons on the sides of the Crown:

               Otherwise

4. Adding the bead on the bow:

5. Adding the charms (four-leaf clover or red pepper and metal tassel):

6. Bow with dovetails or classic cut:

 Bow with dovetail cut

 Bow with classic cut

7. Types of Bridal Veil (also called gypsophila, mist, white flowers):

Natural wedding veil

Stabilized ivory wedding veil

White artificial wedding veil

Further information:

• The circumference should be taken with a tape measure by passing it over the ears and about mid / high forehead. The tape measure should not press or tighten, but it should be loosened. We invite you to give a correct measurement of the circumference to avoid problems later. We remind you that the crown must not pierce through the head, but must be supported, you decide whether horizontally or obliquely.
• To select different types of bows, colors or types of ribbons, contact us via whatsapp at +39 3333653399 or email cdalloro2@gmail.com .
• For any information we will be happy to help you. 

Thank you,

The CDAlloro team

Here is a very useful guide to help you customize your Graduation Favors and fill out the pre-purchase phase. 

1. The processing times for an order for Favors are 48 working hours.

At the end of these hours, we will be able to send the favors, which will be delivered to you in 1/3 working days. 

2. Typology of red cards, without parchment / with parchment. 

3. The internal hand lettering is free, if you prefer printing there will be a surcharge of € 15 on the total cost. After the purchase you will be contacted to define the font. With the printed text you can write anything you want (name, faculty, degree, title, date ..) as the space available will be greater. 

Further information:

• All the favors are handmade by us and can be customized in the type and color of the ribbons. 
• Types of ribbons available: satin, tulle, organza, checked, polka dot, with the word "graduation". 
• The favors with the painting can be customized to your liking. You will have to provide us with the drawing, we will make the draft and we will send you the free estimate.  
• For any information we will be happy to help you.

Thank you, 

The CDAlloro team

To create our compositions we use a particular white flower called Bride's Veil or more technically Gypsophila / Gipsofila. 

During the months between October and May we only use freshly cut wedding veil (unless you require the stabilized or artificial one). Due to the high summer temperatures of the months of June, July, August and September we propose one of the alternatives proposed, Stabilized or Artificial Wedding Veil. This is to ensure greater conservation and beauty of the final result of the crown.

The stabilized gypsophila is ivory in color and smaller than the natural one (it is not dry!), but it will remain so forever, unlike the natural one which dries after 2/3 days. 

If you have any doubts, feel free to contact us via the whatsapp button and request examples. 

The change is free, does not involve any surcharge and is carried out automatically. 

Here is a very useful guide to help you customize the Laurel Wreath for Graduation and fill in the pre-purchase phase. 

1. Satin Ribbon Colors:

Available colors not shown in the photo: cream, candy pink.

2. Type of bow on the back of the crown:

 Simple 2-tailed bow

 Simple bow with 4 tails

 2-tailed bow

 Bow Elaborated with 4 tails

 Two-tone bow

 2-tailed cockade bow

 4-tailed cockade bow

 Bow Elaborated in satin and tulle / organza

 Bow Elaborated with 2-tailed curls

 Bow Elaborated with 4-tail curls

 Bow with color scale (minimum 3) in cockade

3. Presence of 2 ribbons on the sides of the Crown:

               Otherwise

4. Adding the bead on the bow:

5. Adding the charms (four-leaf clover or red pepper and metal tassel):

6. Bow with dovetails or classic cut:

 Bow with dovetail cut

 Bow with classic cut

7. Types of Bridal Veil (also called gypsophila, mist, white flowers):

Natural wedding veil

Stabilized ivory wedding veil

White artificial wedding veil

Further information:

• The circumference should be taken with a tape measure by passing it over the ears and about mid / high forehead. The tape measure should not press or tighten, but it should be loosened. We invite you to give a correct measurement of the circumference to avoid problems later. We remind you that the crown must not pierce through the head, but must be supported, you decide whether horizontally or obliquely.
• To select different types of bows, colors or types of ribbons, contact us via whatsapp at +39 3333653399 or email cdalloro2@gmail.com .
• For any information we will be happy to help you. 

Thank you,

The CDAlloro team

Here is a very useful guide to help you customize your Graduation Favors and fill out the pre-purchase phase. 

1. The processing times for an order for Favors are 48 working hours.

At the end of these hours, we will be able to send the favors, which will be delivered to you in 1/3 working days. 

2. Typology of red cards, without parchment / with parchment. 

3. The internal hand lettering is free, if you prefer printing there will be a surcharge of € 15 on the total cost. After the purchase you will be contacted to define the font. With the printed text you can write anything you want (name, faculty, degree, title, date ..) as the space available will be greater. 

Further information:

• All the favors are handmade by us and can be customized in the type and color of the ribbons. 
• Types of ribbons available: satin, tulle, organza, checked, polka dot, with the word "graduation". 
• The favors with the painting can be customized to your liking. You will have to provide us with the drawing, we will make the draft and we will send you the free estimate.  
• For any information we will be happy to help you.

Thank you, 

The CDAlloro team

To create our compositions we use a particular white flower called Bride's Veil or more technically Gypsophila / Gipsofila. 

During the months between October and May we only use freshly cut wedding veil (unless you require the stabilized or artificial one). Due to the high summer temperatures of the months of June, July, August and September we propose one of the alternatives proposed, Stabilized or Artificial Wedding Veil. This is to ensure greater conservation and beauty of the final result of the crown.

The stabilized gypsophila is ivory in color and smaller than the natural one (it is not dry!), but it will remain so forever, unlike the natural one which dries after 2/3 days. 

If you have any doubts, feel free to contact us via the whatsapp button and request examples. 

The change is free, does not involve any surcharge and is carried out automatically. 

Here is a very useful guide to help you customize the Laurel Wreath for Graduation and fill in the pre-purchase phase. 

1. Satin Ribbon Colors:

Available colors not shown in the photo: cream, candy pink.

2. Type of bow on the back of the crown:

 Simple 2-tailed bow

 Simple bow with 4 tails

 2-tailed bow

 Bow Elaborated with 4 tails

 Two-tone bow

 2-tailed cockade bow

 4-tailed cockade bow

 Bow Elaborated in satin and tulle / organza

 Bow Elaborated with 2-tailed curls

 Bow Elaborated with 4-tail curls

 Bow with color scale (minimum 3) in cockade

3. Presence of 2 ribbons on the sides of the Crown:

               Otherwise

4. Adding the bead on the bow:

5. Adding the charms (four-leaf clover or red pepper and metal tassel):

6. Bow with dovetails or classic cut:

 Bow with dovetail cut

 Bow with classic cut

7. Types of Bridal Veil (also called gypsophila, mist, white flowers):

Natural wedding veil

Stabilized ivory wedding veil

White artificial wedding veil

Further information:

• The circumference should be taken with a tape measure by passing it over the ears and about mid / high forehead. The tape measure should not press or tighten, but it should be loosened. We invite you to give a correct measurement of the circumference to avoid problems later. We remind you that the crown must not pierce through the head, but must be supported, you decide whether horizontally or obliquely.
• To select different types of bows, colors or types of ribbons, contact us via whatsapp at +39 3333653399 or email cdalloro2@gmail.com .
• For any information we will be happy to help you. 

Thank you,

The CDAlloro team

Here is a very useful guide to help you customize your Graduation Favors and fill out the pre-purchase phase. 

1. The processing times for an order for Favors are 48 working hours.

At the end of these hours, we will be able to send the favors, which will be delivered to you in 1/3 working days. 

2. Typology of red cards, without parchment / with parchment. 

3. The internal hand lettering is free, if you prefer printing there will be a surcharge of € 15 on the total cost. After the purchase you will be contacted to define the font. With the printed text you can write anything you want (name, faculty, degree, title, date ..) as the space available will be greater. 

Further information:

• All the favors are handmade by us and can be customized in the type and color of the ribbons. 
• Types of ribbons available: satin, tulle, organza, checked, polka dot, with the word "graduation". 
• The favors with the painting can be customized to your liking. You will have to provide us with the drawing, we will make the draft and we will send you the free estimate.  
• For any information we will be happy to help you.

Thank you, 

The CDAlloro team

To create our compositions we use a particular white flower called Bride's Veil or more technically Gypsophila / Gipsofila. 

During the months between October and May we only use freshly cut wedding veil (unless you require the stabilized or artificial one). Due to the high summer temperatures of the months of June, July, August and September we propose one of the alternatives proposed, Stabilized or Artificial Wedding Veil. This is to ensure greater conservation and beauty of the final result of the crown.

The stabilized gypsophila is ivory in color and smaller than the natural one (it is not dry!), but it will remain so forever, unlike the natural one which dries after 2/3 days. 

If you have any doubts, feel free to contact us via the whatsapp button and request examples. 

The change is free, does not involve any surcharge and is carried out automatically. 

Here is a very useful guide to help you customize the Laurel Wreath for Graduation and fill in the pre-purchase phase. 

1. Satin Ribbon Colors:

Available colors not shown in the photo: cream, candy pink.

2. Type of bow on the back of the crown:

 Simple 2-tailed bow

 Simple bow with 4 tails

 2-tailed bow

 Bow Elaborated with 4 tails

 Two-tone bow

 2-tailed cockade bow

 4-tailed cockade bow

 Bow Elaborated in satin and tulle / organza

 Bow Elaborated with 2-tailed curls

 Bow Elaborated with 4-tail curls

 Bow with color scale (minimum 3) in cockade

3. Presence of 2 ribbons on the sides of the Crown:

               Otherwise

4. Adding the bead on the bow:

5. Adding the charms (four-leaf clover or red pepper and metal tassel):

6. Bow with dovetails or classic cut:

 Bow with dovetail cut

 Bow with classic cut

7. Types of Bridal Veil (also called gypsophila, mist, white flowers):

Natural wedding veil

Stabilized ivory wedding veil

White artificial wedding veil

Further information:

• The circumference should be taken with a tape measure by passing it over the ears and about mid / high forehead. The tape measure should not press or tighten, but it should be loosened. We invite you to give a correct measurement of the circumference to avoid problems later. We remind you that the crown must not pierce through the head, but must be supported, you decide whether horizontally or obliquely.
• To select different types of bows, colors or types of ribbons, contact us via whatsapp at +39 3333653399 or email cdalloro2@gmail.com .
• For any information we will be happy to help you. 

Thank you,

The CDAlloro team

Here is a very useful guide to help you customize your Graduation Favors and fill out the pre-purchase phase. 

1. The processing times for an order for Favors are 48 working hours.

At the end of these hours, we will be able to send the favors, which will be delivered to you in 1/3 working days. 

2. Typology of red cards, without parchment / with parchment. 

3. The internal hand lettering is free, if you prefer printing there will be a surcharge of € 15 on the total cost. After the purchase you will be contacted to define the font. With the printed text you can write anything you want (name, faculty, degree, title, date ..) as the space available will be greater. 

Further information:

• All the favors are handmade by us and can be customized in the type and color of the ribbons. 
• Types of ribbons available: satin, tulle, organza, checked, polka dot, with the word "graduation". 
• The favors with the painting can be customized to your liking. You will have to provide us with the drawing, we will make the draft and we will send you the free estimate.  
• For any information we will be happy to help you.

Thank you, 

The CDAlloro team

To create our compositions we use a particular white flower called Bride's Veil or more technically Gypsophila / Gipsofila. 

During the months between October and May we only use freshly cut wedding veil (unless you require the stabilized or artificial one). Due to the high summer temperatures of the months of June, July, August and September we propose one of the alternatives proposed, Stabilized or Artificial Wedding Veil. This is to ensure greater conservation and beauty of the final result of the crown.

The stabilized gypsophila is ivory in color and smaller than the natural one (it is not dry!), but it will remain so forever, unlike the natural one which dries after 2/3 days. 

If you have any doubts, feel free to contact us via the whatsapp button and request examples. 

The change is free, does not involve any surcharge and is carried out automatically. 

Here is a very useful guide to help you customize the Laurel Wreath for Graduation and fill in the pre-purchase phase. 

1. Satin Ribbon Colors:

Available colors not shown in the photo: cream, candy pink.

2. Type of bow on the back of the crown:

 Simple 2-tailed bow

 Simple bow with 4 tails

 2-tailed bow

 Bow Elaborated with 4 tails

 Two-tone bow

 2-tailed cockade bow

 4-tailed cockade bow

 Bow Elaborated in satin and tulle / organza

 Bow Elaborated with 2-tailed curls

 Bow Elaborated with 4-tail curls

 Bow with color scale (minimum 3) in cockade

3. Presence of 2 ribbons on the sides of the Crown:

               Otherwise

4. Adding the bead on the bow:

5. Adding the charms (four-leaf clover or red pepper and metal tassel):

6. Bow with dovetails or classic cut:

 Bow with dovetail cut

 Bow with classic cut

7. Types of Bridal Veil (also called gypsophila, mist, white flowers):

Natural wedding veil

Stabilized ivory wedding veil

White artificial wedding veil

Further information:

• The circumference should be taken with a tape measure by passing it over the ears and about mid / high forehead. The tape measure should not press or tighten, but it should be loosened. We invite you to give a correct measurement of the circumference to avoid problems later. We remind you that the crown must not pierce through the head, but must be supported, you decide whether horizontally or obliquely.
• To select different types of bows, colors or types of ribbons, contact us via whatsapp at +39 3333653399 or email cdalloro2@gmail.com .
• For any information we will be happy to help you. 

Thank you,

The CDAlloro team

Here is a very useful guide to help you customize your Graduation Favors and fill out the pre-purchase phase. 

1. The processing times for an order for Favors are 48 working hours.

At the end of these hours, we will be able to send the favors, which will be delivered to you in 1/3 working days. 

2. Typology of red cards, without parchment / with parchment. 

3. The internal hand lettering is free, if you prefer printing there will be a surcharge of € 15 on the total cost. After the purchase you will be contacted to define the font. With the printed text you can write anything you want (name, faculty, degree, title, date ..) as the space available will be greater. 

Further information:

• All the favors are handmade by us and can be customized in the type and color of the ribbons. 
• Types of ribbons available: satin, tulle, organza, checked, polka dot, with the word "graduation". 
• The favors with the painting can be customized to your liking. You will have to provide us with the drawing, we will make the draft and we will send you the free estimate.  
• For any information we will be happy to help you.

Thank you, 

The CDAlloro team

To create our compositions we use a particular white flower called Bride's Veil or more technically Gypsophila / Gipsofila. 

During the months between October and May we only use freshly cut wedding veil (unless you require the stabilized or artificial one). Due to the high summer temperatures of the months of June, July, August and September we propose one of the alternatives proposed, Stabilized or Artificial Wedding Veil. This is to ensure greater conservation and beauty of the final result of the crown.

The stabilized gypsophila is ivory in color and smaller than the natural one (it is not dry!), but it will remain so forever, unlike the natural one which dries after 2/3 days. 

If you have any doubts, feel free to contact us via the whatsapp button and request examples. 

The change is free, does not involve any surcharge and is carried out automatically. 

Here is a very useful guide to help you customize the Laurel Wreath for Graduation and fill in the pre-purchase phase. 

1. Satin Ribbon Colors:

Available colors not shown in the photo: cream, candy pink.

2. Type of bow on the back of the crown:

 Simple 2-tailed bow

 Simple bow with 4 tails

 2-tailed bow

 Bow Elaborated with 4 tails

 Two-tone bow

 2-tailed cockade bow

 4-tailed cockade bow

 Bow Elaborated in satin and tulle / organza

 Bow Elaborated with 2-tailed curls

 Bow Elaborated with 4-tail curls

 Bow with color scale (minimum 3) in cockade

3. Presence of 2 ribbons on the sides of the Crown:

               Otherwise

4. Adding the bead on the bow:

5. Adding the charms (four-leaf clover or red pepper and metal tassel):

6. Bow with dovetails or classic cut:

 Bow with dovetail cut

 Bow with classic cut

7. Types of Bridal Veil (also called gypsophila, mist, white flowers):

Natural wedding veil

Stabilized ivory wedding veil

White artificial wedding veil

Further information:

• The circumference should be taken with a tape measure by passing it over the ears and about mid / high forehead. The tape measure should not press or tighten, but it should be loosened. We invite you to give a correct measurement of the circumference to avoid problems later. We remind you that the crown must not pierce through the head, but must be supported, you decide whether horizontally or obliquely.
• To select different types of bows, colors or types of ribbons, contact us via whatsapp at +39 3333653399 or email cdalloro2@gmail.com .
• For any information we will be happy to help you. 

Thank you,

The CDAlloro team

Here is a very useful guide to help you customize your Graduation Favors and fill out the pre-purchase phase. 

1. The processing times for an order for Favors are 48 working hours.

At the end of these hours, we will be able to send the favors, which will be delivered to you in 1/3 working days. 

2. Typology of red cards, without parchment / with parchment. 

3. The internal hand lettering is free, if you prefer printing there will be a surcharge of € 15 on the total cost. After the purchase you will be contacted to define the font. With the printed text you can write anything you want (name, faculty, degree, title, date ..) as the space available will be greater. 

Further information:

• All the favors are handmade by us and can be customized in the type and color of the ribbons. 
• Types of ribbons available: satin, tulle, organza, checked, polka dot, with the word "graduation". 
• The favors with the painting can be customized to your liking. You will have to provide us with the drawing, we will make the draft and we will send you the free estimate.  
• For any information we will be happy to help you.

Thank you, 

The CDAlloro team

To create our compositions we use a particular white flower called Bride's Veil or more technically Gypsophila / Gipsofila. 

During the months between October and May we only use freshly cut wedding veil (unless you require the stabilized or artificial one). Due to the high summer temperatures of the months of June, July, August and September we propose one of the alternatives proposed, Stabilized or Artificial Wedding Veil. This is to ensure greater conservation and beauty of the final result of the crown.

The stabilized gypsophila is ivory in color and smaller than the natural one (it is not dry!), but it will remain so forever, unlike the natural one which dries after 2/3 days. 

If you have any doubts, feel free to contact us via the whatsapp button and request examples. 

The change is free, does not involve any surcharge and is carried out automatically. 

Here is a very useful guide to help you customize the Laurel Wreath for Graduation and fill in the pre-purchase phase. 

1. Satin Ribbon Colors:

Available colors not shown in the photo: cream, candy pink.

2. Type of bow on the back of the crown:

 Simple 2-tailed bow

 Simple bow with 4 tails

 2-tailed bow

 Bow Elaborated with 4 tails

 Two-tone bow

 2-tailed cockade bow

 4-tailed cockade bow

 Bow Elaborated in satin and tulle / organza

 Bow Elaborated with 2-tailed curls

 Bow Elaborated with 4-tail curls

 Bow with color scale (minimum 3) in cockade

3. Presence of 2 ribbons on the sides of the Crown:

               Otherwise

4. Adding the bead on the bow:

5. Adding the charms (four-leaf clover or red pepper and metal tassel):

6. Bow with dovetails or classic cut:

 Bow with dovetail cut

 Bow with classic cut

7. Types of Bridal Veil (also called gypsophila, mist, white flowers):

Natural wedding veil

Stabilized ivory wedding veil

White artificial wedding veil

Further information:

• The circumference should be taken with a tape measure by passing it over the ears and about mid / high forehead. The tape measure should not press or tighten, but it should be loosened. We invite you to give a correct measurement of the circumference to avoid problems later. We remind you that the crown must not pierce through the head, but must be supported, you decide whether horizontally or obliquely.
• To select different types of bows, colors or types of ribbons, contact us via whatsapp at +39 3333653399 or email cdalloro2@gmail.com .
• For any information we will be happy to help you. 

Thank you,

The CDAlloro team

Here is a very useful guide to help you customize your Graduation Favors and fill out the pre-purchase phase. 

1. The processing times for an order for Favors are 48 working hours.

At the end of these hours, we will be able to send the favors, which will be delivered to you in 1/3 working days. 

2. Typology of red cards, without parchment / with parchment. 

3. The internal hand lettering is free, if you prefer printing there will be a surcharge of € 15 on the total cost. After the purchase you will be contacted to define the font. With the printed text you can write anything you want (name, faculty, degree, title, date ..) as the space available will be greater. 

Further information:

• All the favors are handmade by us and can be customized in the type and color of the ribbons. 
• Types of ribbons available: satin, tulle, organza, checked, polka dot, with the word "graduation". 
• The favors with the painting can be customized to your liking. You will have to provide us with the drawing, we will make the draft and we will send you the free estimate.  
• For any information we will be happy to help you.

Thank you, 

The CDAlloro team

To create our compositions we use a particular white flower called Bride's Veil or more technically Gypsophila / Gipsofila. 

During the months between October and May we only use freshly cut wedding veil (unless you require the stabilized or artificial one). Due to the high summer temperatures of the months of June, July, August and September we propose one of the alternatives proposed, Stabilized or Artificial Wedding Veil. This is to ensure greater conservation and beauty of the final result of the crown.

The stabilized gypsophila is ivory in color and smaller than the natural one (it is not dry!), but it will remain so forever, unlike the natural one which dries after 2/3 days. 

If you have any doubts, feel free to contact us via the whatsapp button and request examples. 

The change is free, does not involve any surcharge and is carried out automatically. 

Here is a very useful guide to help you customize the Laurel Wreath for Graduation and fill in the pre-purchase phase. 

1. Satin Ribbon Colors:

Available colors not shown in the photo: cream, candy pink.

2. Type of bow on the back of the crown:

 Simple 2-tailed bow

 Simple bow with 4 tails

 2-tailed bow

 Bow Elaborated with 4 tails

 Two-tone bow

 2-tailed cockade bow

 4-tailed cockade bow

 Bow Elaborated in satin and tulle / organza

 Bow Elaborated with 2-tailed curls

 Bow Elaborated with 4-tail curls

 Bow with color scale (minimum 3) in cockade

3. Presence of 2 ribbons on the sides of the Crown:

               Otherwise

4. Adding the bead on the bow:

5. Adding the charms (four-leaf clover or red pepper and metal tassel):

6. Bow with dovetails or classic cut:

 Bow with dovetail cut

 Bow with classic cut

7. Types of Bridal Veil (also called gypsophila, mist, white flowers):

Natural wedding veil

Stabilized ivory wedding veil

White artificial wedding veil

Further information:

• The circumference should be taken with a tape measure by passing it over the ears and about mid / high forehead. The tape measure should not press or tighten, but it should be loosened. We invite you to give a correct measurement of the circumference to avoid problems later. We remind you that the crown must not pierce through the head, but must be supported, you decide whether horizontally or obliquely.
• To select different types of bows, colors or types of ribbons, contact us via whatsapp at +39 3333653399 or email cdalloro2@gmail.com .
• For any information we will be happy to help you. 

Thank you,

The CDAlloro team

Here is a very useful guide to help you customize your Graduation Favors and fill out the pre-purchase phase. 

1. The processing times for an order for Favors are 48 working hours.

At the end of these hours, we will be able to send the favors, which will be delivered to you in 1/3 working days. 

2. Typology of red cards, without parchment / with parchment. 

3. The internal hand lettering is free, if you prefer printing there will be a surcharge of € 15 on the total cost. After the purchase you will be contacted to define the font. With the printed text you can write anything you want (name, faculty, degree, title, date ..) as the space available will be greater. 

Further information:

• All the favors are handmade by us and can be customized in the type and color of the ribbons. 
• Types of ribbons available: satin, tulle, organza, checked, polka dot, with the word "graduation". 
• The favors with the painting can be customized to your liking. You will have to provide us with the drawing, we will make the draft and we will send you the free estimate.  
• For any information we will be happy to help you.

Thank you, 

The CDAlloro team

To create our compositions we use a particular white flower called Bride's Veil or more technically Gypsophila / Gipsofila. 

During the months between October and May we only use freshly cut wedding veil (unless you require the stabilized or artificial one). Due to the high summer temperatures of the months of June, July, August and September we propose one of the alternatives proposed, Stabilized or Artificial Wedding Veil. This is to ensure greater conservation and beauty of the final result of the crown.

The stabilized gypsophila is ivory in color and smaller than the natural one (it is not dry!), but it will remain so forever, unlike the natural one which dries after 2/3 days. 

If you have any doubts, feel free to contact us via the whatsapp button and request examples. 

The change is free, does not involve any surcharge and is carried out automatically. 

Here is a very useful guide to help you customize the Laurel Wreath for Graduation and fill in the pre-purchase phase. 

1. Satin Ribbon Colors:

Available colors not shown in the photo: cream, candy pink.

2. Type of bow on the back of the crown:

 Simple 2-tailed bow

 Simple bow with 4 tails

 2-tailed bow

 Bow Elaborated with 4 tails

 Two-tone bow

 2-tailed cockade bow

 4-tailed cockade bow

 Bow Elaborated in satin and tulle / organza

 Bow Elaborated with 2-tailed curls

 Bow Elaborated with 4-tail curls

 Bow with color scale (minimum 3) in cockade

3. Presence of 2 ribbons on the sides of the Crown:

               Otherwise

4. Adding the bead on the bow:

5. Adding the charms (four-leaf clover or red pepper and metal tassel):

6. Bow with dovetails or classic cut:

 Bow with dovetail cut

 Bow with classic cut

7. Types of Bridal Veil (also called gypsophila, mist, white flowers):

Natural wedding veil

Stabilized ivory wedding veil

White artificial wedding veil

Further information:

• The circumference should be taken with a tape measure by passing it over the ears and about mid / high forehead. The tape measure should not press or tighten, but it should be loosened. We invite you to give a correct measurement of the circumference to avoid problems later. We remind you that the crown must not pierce through the head, but must be supported, you decide whether horizontally or obliquely.
• To select different types of bows, colors or types of ribbons, contact us via whatsapp at +39 3333653399 or email cdalloro2@gmail.com .
• For any information we will be happy to help you. 

Thank you,

The CDAlloro team

Here is a very useful guide to help you customize your Graduation Favors and fill out the pre-purchase phase. 

1. The processing times for an order for Favors are 48 working hours.

At the end of these hours, we will be able to send the favors, which will be delivered to you in 1/3 working days. 

2. Typology of red cards, without parchment / with parchment. 

3. The internal hand lettering is free, if you prefer printing there will be a surcharge of € 15 on the total cost. After the purchase you will be contacted to define the font. With the printed text you can write anything you want (name, faculty, degree, title, date ..) as the space available will be greater. 

Further information:

• All the favors are handmade by us and can be customized in the type and color of the ribbons. 
• Types of ribbons available: satin, tulle, organza, checked, polka dot, with the word "graduation". 
• The favors with the painting can be customized to your liking. You will have to provide us with the drawing, we will make the draft and we will send you the free estimate.  
• For any information we will be happy to help you.

Thank you, 

The CDAlloro team

To create our compositions we use a particular white flower called Bride's Veil or more technically Gypsophila / Gipsofila. 

During the months between October and May we only use freshly cut wedding veil (unless you require the stabilized or artificial one). Due to the high summer temperatures of the months of June, July, August and September we propose one of the alternatives proposed, Stabilized or Artificial Wedding Veil. This is to ensure greater conservation and beauty of the final result of the crown.

The stabilized gypsophila is ivory in color and smaller than the natural one (it is not dry!), but it will remain so forever, unlike the natural one which dries after 2/3 days. 

If you have any doubts, feel free to contact us via the whatsapp button and request examples. 

The change is free, does not involve any surcharge and is carried out automatically. 

Here is a very useful guide to help you customize the Laurel Wreath for Graduation and fill in the pre-purchase phase. 

1. Satin Ribbon Colors:

Available colors not shown in the photo: cream, candy pink.

2. Type of bow on the back of the crown:

 Simple 2-tailed bow

 Simple bow with 4 tails

 2-tailed bow

 Bow Elaborated with 4 tails

 Two-tone bow

 2-tailed cockade bow

 4-tailed cockade bow

 Bow Elaborated in satin and tulle / organza

 Bow Elaborated with 2-tailed curls

 Bow Elaborated with 4-tail curls

 Bow with color scale (minimum 3) in cockade

3. Presence of 2 ribbons on the sides of the Crown:

               Otherwise

4. Adding the bead on the bow:

5. Adding the charms (four-leaf clover or red pepper and metal tassel):

6. Bow with dovetails or classic cut:

 Bow with dovetail cut

 Bow with classic cut

7. Types of Bridal Veil (also called gypsophila, mist, white flowers):

Natural wedding veil

Stabilized ivory wedding veil

White artificial wedding veil

Further information:

• The circumference should be taken with a tape measure by passing it over the ears and about mid / high forehead. The tape measure should not press or tighten, but it should be loosened. We invite you to give a correct measurement of the circumference to avoid problems later. We remind you that the crown must not pierce through the head, but must be supported, you decide whether horizontally or obliquely.
• To select different types of bows, colors or types of ribbons, contact us via whatsapp at +39 3333653399 or email cdalloro2@gmail.com .
• For any information we will be happy to help you. 

Thank you,

The CDAlloro team

Here is a very useful guide to help you customize your Graduation Favors and fill out the pre-purchase phase. 

1. The processing times for an order for Favors are 48 working hours.

At the end of these hours, we will be able to send the favors, which will be delivered to you in 1/3 working days. 

2. Typology of red cards, without parchment / with parchment. 

3. The internal hand lettering is free, if you prefer printing there will be a surcharge of € 15 on the total cost. After the purchase you will be contacted to define the font. With the printed text you can write anything you want (name, faculty, degree, title, date ..) as the space available will be greater. 

Further information:

• All the favors are handmade by us and can be customized in the type and color of the ribbons. 
• Types of ribbons available: satin, tulle, organza, checked, polka dot, with the word "graduation". 
• The favors with the painting can be customized to your liking. You will have to provide us with the drawing, we will make the draft and we will send you the free estimate.  
• For any information we will be happy to help you.

Thank you, 

The CDAlloro team

To create our compositions we use a particular white flower called Bride's Veil or more technically Gypsophila / Gipsofila. 

During the months between October and May we only use freshly cut wedding veil (unless you require the stabilized or artificial one). Due to the high summer temperatures of the months of June, July, August and September we propose one of the alternatives proposed, Stabilized or Artificial Wedding Veil. This is to ensure greater conservation and beauty of the final result of the crown.

The stabilized gypsophila is ivory in color and smaller than the natural one (it is not dry!), but it will remain so forever, unlike the natural one which dries after 2/3 days. 

If you have any doubts, feel free to contact us via the whatsapp button and request examples. 

The change is free, does not involve any surcharge and is carried out automatically. 

Here is a very useful guide to help you customize the Laurel Wreath for Graduation and fill in the pre-purchase phase. 

1. Satin Ribbon Colors:

Available colors not shown in the photo: cream, candy pink.

2. Type of bow on the back of the crown:

 Simple 2-tailed bow

 Simple bow with 4 tails

 2-tailed bow

 Bow Elaborated with 4 tails

 Two-tone bow

 2-tailed cockade bow

 4-tailed cockade bow

 Bow Elaborated in satin and tulle / organza

 Bow Elaborated with 2-tailed curls

 Bow Elaborated with 4-tail curls

 Bow with color scale (minimum 3) in cockade

3. Presence of 2 ribbons on the sides of the Crown:

               Otherwise

4. Adding the bead on the bow:

5. Adding the charms (four-leaf clover or red pepper and metal tassel):

6. Bow with dovetails or classic cut:

 Bow with dovetail cut

 Bow with classic cut

7. Types of Bridal Veil (also called gypsophila, mist, white flowers):

Natural wedding veil

Stabilized ivory wedding veil

White artificial wedding veil

Further information:

• The circumference should be taken with a tape measure by passing it over the ears and about mid / high forehead. The tape measure should not press or tighten, but it should be loosened. We invite you to give a correct measurement of the circumference to avoid problems later. We remind you that the crown must not pierce through the head, but must be supported, you decide whether horizontally or obliquely.
• To select different types of bows, colors or types of ribbons, contact us via whatsapp at +39 3333653399 or email cdalloro2@gmail.com .
• For any information we will be happy to help you. 

Thank you,

The CDAlloro team

Here is a very useful guide to help you customize your Graduation Favors and fill out the pre-purchase phase. 

1. The processing times for an order for Favors are 48 working hours.

At the end of these hours, we will be able to send the favors, which will be delivered to you in 1/3 working days. 

2. Typology of red cards, without parchment / with parchment. 

3. The internal hand lettering is free, if you prefer printing there will be a surcharge of € 15 on the total cost. After the purchase you will be contacted to define the font. With the printed text you can write anything you want (name, faculty, degree, title, date ..) as the space available will be greater. 

Further information:

• All the favors are handmade by us and can be customized in the type and color of the ribbons. 
• Types of ribbons available: satin, tulle, organza, checked, polka dot, with the word "graduation". 
• The favors with the painting can be customized to your liking. You will have to provide us with the drawing, we will make the draft and we will send you the free estimate.  
• For any information we will be happy to help you.

Thank you, 

The CDAlloro team

To create our compositions we use a particular white flower called Bride's Veil or more technically Gypsophila / Gipsofila. 

During the months between October and May we only use freshly cut wedding veil (unless you require the stabilized or artificial one). Due to the high summer temperatures of the months of June, July, August and September we propose one of the alternatives proposed, Stabilized or Artificial Wedding Veil. This is to ensure greater conservation and beauty of the final result of the crown.

The stabilized gypsophila is ivory in color and smaller than the natural one (it is not dry!), but it will remain so forever, unlike the natural one which dries after 2/3 days. 

If you have any doubts, feel free to contact us via the whatsapp button and request examples. 

The change is free, does not involve any surcharge and is carried out automatically. 

Here is a very useful guide to help you customize the Laurel Wreath for Graduation and fill in the pre-purchase phase. 

1. Satin Ribbon Colors:

Available colors not shown in the photo: cream, candy pink.

2. Type of bow on the back of the crown:

 Simple 2-tailed bow

 Simple bow with 4 tails

 2-tailed bow

 Bow Elaborated with 4 tails

 Two-tone bow

 2-tailed cockade bow

 4-tailed cockade bow

 Bow Elaborated in satin and tulle / organza

 Bow Elaborated with 2-tailed curls

 Bow Elaborated with 4-tail curls

 Bow with color scale (minimum 3) in cockade

3. Presence of 2 ribbons on the sides of the Crown:

               Otherwise

4. Adding the bead on the bow:

5. Adding the charms (four-leaf clover or red pepper and metal tassel):

6. Bow with dovetails or classic cut:

 Bow with dovetail cut

 Bow with classic cut

7. Types of Bridal Veil (also called gypsophila, mist, white flowers):

Natural wedding veil

Stabilized ivory wedding veil

White artificial wedding veil

Further information:

• The circumference should be taken with a tape measure by passing it over the ears and about mid / high forehead. The tape measure should not press or tighten, but it should be loosened. We invite you to give a correct measurement of the circumference to avoid problems later. We remind you that the crown must not pierce through the head, but must be supported, you decide whether horizontally or obliquely.
• To select different types of bows, colors or types of ribbons, contact us via whatsapp at +39 3333653399 or email cdalloro2@gmail.com .
• For any information we will be happy to help you. 

Thank you,

The CDAlloro team

Here is a very useful guide to help you customize your Graduation Favors and fill out the pre-purchase phase. 

1. The processing times for an order for Favors are 48 working hours.

At the end of these hours, we will be able to send the favors, which will be delivered to you in 1/3 working days. 

2. Typology of red cards, without parchment / with parchment. 

3. The internal hand lettering is free, if you prefer printing there will be a surcharge of € 15 on the total cost. After the purchase you will be contacted to define the font. With the printed text you can write anything you want (name, faculty, degree, title, date ..) as the space available will be greater. 

Further information:

• All the favors are handmade by us and can be customized in the type and color of the ribbons. 
• Types of ribbons available: satin, tulle, organza, checked, polka dot, with the word "graduation". 
• The favors with the painting can be customized to your liking. You will have to provide us with the drawing, we will make the draft and we will send you the free estimate.  
• For any information we will be happy to help you.

Thank you, 

The CDAlloro team

To create our compositions we use a particular white flower called Bride's Veil or more technically Gypsophila / Gipsofila. 

During the months between October and May we only use freshly cut wedding veil (unless you require the stabilized or artificial one). Due to the high summer temperatures of the months of June, July, August and September we propose one of the alternatives proposed, Stabilized or Artificial Wedding Veil. This is to ensure greater conservation and beauty of the final result of the crown.

The stabilized gypsophila is ivory in color and smaller than the natural one (it is not dry!), but it will remain so forever, unlike the natural one which dries after 2/3 days. 

If you have any doubts, feel free to contact us via the whatsapp button and request examples. 

The change is free, does not involve any surcharge and is carried out automatically. 

Here is a very useful guide to help you customize the Laurel Wreath for Graduation and fill in the pre-purchase phase. 

1. Satin Ribbon Colors:

Available colors not shown in the photo: cream, candy pink.

2. Type of bow on the back of the crown:

 Simple 2-tailed bow

 Simple bow with 4 tails

 2-tailed bow

 Bow Elaborated with 4 tails

 Two-tone bow

 2-tailed cockade bow

 4-tailed cockade bow

 Bow Elaborated in satin and tulle / organza

 Bow Elaborated with 2-tailed curls

 Bow Elaborated with 4-tail curls

 Bow with color scale (minimum 3) in cockade

3. Presence of 2 ribbons on the sides of the Crown:

               Otherwise

4. Adding the bead on the bow:

5. Adding the charms (four-leaf clover or red pepper and metal tassel):

6. Bow with dovetails or classic cut:

 Bow with dovetail cut

 Bow with classic cut

7. Types of Bridal Veil (also called gypsophila, mist, white flowers):

Natural wedding veil

Stabilized ivory wedding veil

White artificial wedding veil

Further information:

• The circumference should be taken with a tape measure by passing it over the ears and about mid / high forehead. The tape measure should not press or tighten, but it should be loosened. We invite you to give a correct measurement of the circumference to avoid problems later. We remind you that the crown must not pierce through the head, but must be supported, you decide whether horizontally or obliquely.
• To select different types of bows, colors or types of ribbons, contact us via whatsapp at +39 3333653399 or email cdalloro2@gmail.com .
• For any information we will be happy to help you. 

Thank you,

The CDAlloro team

Here is a very useful guide to help you customize your Graduation Favors and fill out the pre-purchase phase. 

1. The processing times for an order for Favors are 48 working hours.

At the end of these hours, we will be able to send the favors, which will be delivered to you in 1/3 working days. 

2. Typology of red cards, without parchment / with parchment. 

3. The internal hand lettering is free, if you prefer printing there will be a surcharge of € 15 on the total cost. After the purchase you will be contacted to define the font. With the printed text you can write anything you want (name, faculty, degree, title, date ..) as the space available will be greater. 

Further information:

• All the favors are handmade by us and can be customized in the type and color of the ribbons. 
• Types of ribbons available: satin, tulle, organza, checked, polka dot, with the word "graduation". 
• The favors with the painting can be customized to your liking. You will have to provide us with the drawing, we will make the draft and we will send you the free estimate.  
• For any information we will be happy to help you.

Thank you, 

The CDAlloro team

To create our compositions we use a particular white flower called Bride's Veil or more technically Gypsophila / Gipsofila. 

During the months between October and May we only use freshly cut wedding veil (unless you require the stabilized or artificial one). Due to the high summer temperatures of the months of June, July, August and September we propose one of the alternatives proposed, Stabilized or Artificial Wedding Veil. This is to ensure greater conservation and beauty of the final result of the crown.

The stabilized gypsophila is ivory in color and smaller than the natural one (it is not dry!), but it will remain so forever, unlike the natural one which dries after 2/3 days. 

If you have any doubts, feel free to contact us via the whatsapp button and request examples. 

The change is free, does not involve any surcharge and is carried out automatically. 

Here is a very useful guide to help you customize the Laurel Wreath for Graduation and fill in the pre-purchase phase. 

1. Satin Ribbon Colors:

Available colors not shown in the photo: cream, candy pink.

2. Type of bow on the back of the crown:

 Simple 2-tailed bow

 Simple bow with 4 tails

 2-tailed bow

 Bow Elaborated with 4 tails

 Two-tone bow

 2-tailed cockade bow

 4-tailed cockade bow

 Bow Elaborated in satin and tulle / organza

 Bow Elaborated with 2-tailed curls

 Bow Elaborated with 4-tail curls

 Bow with color scale (minimum 3) in cockade

3. Presence of 2 ribbons on the sides of the Crown:

               Otherwise

4. Adding the bead on the bow:

5. Adding the charms (four-leaf clover or red pepper and metal tassel):

6. Bow with dovetails or classic cut:

 Bow with dovetail cut

 Bow with classic cut

7. Types of Bridal Veil (also called gypsophila, mist, white flowers):

Natural wedding veil

Stabilized ivory wedding veil

White artificial wedding veil

Further information:

• The circumference should be taken with a tape measure by passing it over the ears and about mid / high forehead. The tape measure should not press or tighten, but it should be loosened. We invite you to give a correct measurement of the circumference to avoid problems later. We remind you that the crown must not pierce through the head, but must be supported, you decide whether horizontally or obliquely.
• To select different types of bows, colors or types of ribbons, contact us via whatsapp at +39 3333653399 or email cdalloro2@gmail.com .
• For any information we will be happy to help you. 

Thank you,

The CDAlloro team

Here is a very useful guide to help you customize your Graduation Favors and fill out the pre-purchase phase. 

1. The processing times for an order for Favors are 48 working hours.

At the end of these hours, we will be able to send the favors, which will be delivered to you in 1/3 working days. 

2. Typology of red cards, without parchment / with parchment. 

3. The internal hand lettering is free, if you prefer printing there will be a surcharge of € 15 on the total cost. After the purchase you will be contacted to define the font. With the printed text you can write anything you want (name, faculty, degree, title, date ..) as the space available will be greater. 

Further information:

• All the favors are handmade by us and can be customized in the type and color of the ribbons. 
• Types of ribbons available: satin, tulle, organza, checked, polka dot, with the word "graduation". 
• The favors with the painting can be customized to your liking. You will have to provide us with the drawing, we will make the draft and we will send you the free estimate.  
• For any information we will be happy to help you.

Thank you, 

The CDAlloro team

To create our compositions we use a particular white flower called Bride's Veil or more technically Gypsophila / Gipsofila. 

During the months between October and May we only use freshly cut wedding veil (unless you require the stabilized or artificial one). Due to the high summer temperatures of the months of June, July, August and September we propose one of the alternatives proposed, Stabilized or Artificial Wedding Veil. This is to ensure greater conservation and beauty of the final result of the crown.

The stabilized gypsophila is ivory in color and smaller than the natural one (it is not dry!), but it will remain so forever, unlike the natural one which dries after 2/3 days. 

If you have any doubts, feel free to contact us via the whatsapp button and request examples. 

The change is free, does not involve any surcharge and is carried out automatically. 

Here is a very useful guide to help you customize the Laurel Wreath for Graduation and fill in the pre-purchase phase. 

1. Satin Ribbon Colors:

Available colors not shown in the photo: cream, candy pink.

2. Type of bow on the back of the crown:

 Simple 2-tailed bow

 Simple bow with 4 tails

 2-tailed bow

 Bow Elaborated with 4 tails

 Two-tone bow

 2-tailed cockade bow

 4-tailed cockade bow

 Bow Elaborated in satin and tulle / organza

 Bow Elaborated with 2-tailed curls

 Bow Elaborated with 4-tail curls

 Bow with color scale (minimum 3) in cockade

3. Presence of 2 ribbons on the sides of the Crown:

               Otherwise

4. Adding the bead on the bow:

5. Adding the charms (four-leaf clover or red pepper and metal tassel):

6. Bow with dovetails or classic cut:

 Bow with dovetail cut

 Bow with classic cut

7. Types of Bridal Veil (also called gypsophila, mist, white flowers):

Natural wedding veil

Stabilized ivory wedding veil

White artificial wedding veil

Further information:

• The circumference should be taken with a tape measure by passing it over the ears and about mid / high forehead. The tape measure should not press or tighten, but it should be loosened. We invite you to give a correct measurement of the circumference to avoid problems later. We remind you that the crown must not pierce through the head, but must be supported, you decide whether horizontally or obliquely.
• To select different types of bows, colors or types of ribbons, contact us via whatsapp at +39 3333653399 or email cdalloro2@gmail.com .
• For any information we will be happy to help you. 

Thank you,

The CDAlloro team

Here is a very useful guide to help you customize your Graduation Favors and fill out the pre-purchase phase. 

1. The processing times for an order for Favors are 48 working hours.

At the end of these hours, we will be able to send the favors, which will be delivered to you in 1/3 working days. 

2. Typology of red cards, without parchment / with parchment. 

3. The internal hand lettering is free, if you prefer printing there will be a surcharge of € 15 on the total cost. After the purchase you will be contacted to define the font. With the printed text you can write anything you want (name, faculty, degree, title, date ..) as the space available will be greater. 

Further information:

• All the favors are handmade by us and can be customized in the type and color of the ribbons. 
• Types of ribbons available: satin, tulle, organza, checked, polka dot, with the word "graduation". 
• The favors with the painting can be customized to your liking. You will have to provide us with the drawing, we will make the draft and we will send you the free estimate.  
• For any information we will be happy to help you.

Thank you, 

The CDAlloro team

To create our compositions we use a particular white flower called Bride's Veil or more technically Gypsophila / Gipsofila. 

During the months between October and May we only use freshly cut wedding veil (unless you require the stabilized or artificial one). Due to the high summer temperatures of the months of June, July, August and September we propose one of the alternatives proposed, Stabilized or Artificial Wedding Veil. This is to ensure greater conservation and beauty of the final result of the crown.

The stabilized gypsophila is ivory in color and smaller than the natural one (it is not dry!), but it will remain so forever, unlike the natural one which dries after 2/3 days. 

If you have any doubts, feel free to contact us via the whatsapp button and request examples. 

The change is free, does not involve any surcharge and is carried out automatically. 

Here is a very useful guide to help you customize the Laurel Wreath for Graduation and fill in the pre-purchase phase. 

1. Satin Ribbon Colors:

Available colors not shown in the photo: cream, candy pink.

2. Type of bow on the back of the crown:

 Simple 2-tailed bow

 Simple bow with 4 tails

 2-tailed bow

 Bow Elaborated with 4 tails

 Two-tone bow

 2-tailed cockade bow

 4-tailed cockade bow

 Bow Elaborated in satin and tulle / organza

 Bow Elaborated with 2-tailed curls

 Bow Elaborated with 4-tail curls

 Bow with color scale (minimum 3) in cockade

3. Presence of 2 ribbons on the sides of the Crown:

               Otherwise

4. Adding the bead on the bow:

5. Adding the charms (four-leaf clover or red pepper and metal tassel):

6. Bow with dovetails or classic cut:

 Bow with dovetail cut

 Bow with classic cut

7. Types of Bridal Veil (also called gypsophila, mist, white flowers):

Natural wedding veil

Stabilized ivory wedding veil

White artificial wedding veil

Further information:

• The circumference should be taken with a tape measure by passing it over the ears and about mid / high forehead. The tape measure should not press or tighten, but it should be loosened. We invite you to give a correct measurement of the circumference to avoid problems later. We remind you that the crown must not pierce through the head, but must be supported, you decide whether horizontally or obliquely.
• To select different types of bows, colors or types of ribbons, contact us via whatsapp at +39 3333653399 or email cdalloro2@gmail.com .
• For any information we will be happy to help you. 

Thank you,

The CDAlloro team

Here is a very useful guide to help you customize your Graduation Favors and fill out the pre-purchase phase. 

1. The processing times for an order for Favors are 48 working hours.

At the end of these hours, we will be able to send the favors, which will be delivered to you in 1/3 working days. 

2. Typology of red cards, without parchment / with parchment. 

3. The internal hand lettering is free, if you prefer printing there will be a surcharge of € 15 on the total cost. After the purchase you will be contacted to define the font. With the printed text you can write anything you want (name, faculty, degree, title, date ..) as the space available will be greater. 

Further information:

• All the favors are handmade by us and can be customized in the type and color of the ribbons. 
• Types of ribbons available: satin, tulle, organza, checked, polka dot, with the word "graduation". 
• The favors with the painting can be customized to your liking. You will have to provide us with the drawing, we will make the draft and we will send you the free estimate.  
• For any information we will be happy to help you.

Thank you, 

The CDAlloro team

To create our compositions we use a particular white flower called Bride's Veil or more technically Gypsophila / Gipsofila. 

During the months between October and May we only use freshly cut wedding veil (unless you require the stabilized or artificial one). Due to the high summer temperatures of the months of June, July, August and September we propose one of the alternatives proposed, Stabilized or Artificial Wedding Veil. This is to ensure greater conservation and beauty of the final result of the crown.

The stabilized gypsophila is ivory in color and smaller than the natural one (it is not dry!), but it will remain so forever, unlike the natural one which dries after 2/3 days. 

If you have any doubts, feel free to contact us via the whatsapp button and request examples. 

The change is free, does not involve any surcharge and is carried out automatically. 

Here is a very useful guide to help you customize the Laurel Wreath for Graduation and fill in the pre-purchase phase. 

1. Satin Ribbon Colors:

Available colors not shown in the photo: cream, candy pink.

2. Type of bow on the back of the crown:

 Simple 2-tailed bow

 Simple bow with 4 tails

 2-tailed bow

 Bow Elaborated with 4 tails

 Two-tone bow

 2-tailed cockade bow

 4-tailed cockade bow

 Bow Elaborated in satin and tulle / organza

 Bow Elaborated with 2-tailed curls

 Bow Elaborated with 4-tail curls

 Bow with color scale (minimum 3) in cockade

3. Presence of 2 ribbons on the sides of the Crown:

               Otherwise

4. Adding the bead on the bow:

5. Adding the charms (four-leaf clover or red pepper and metal tassel):

6. Bow with dovetails or classic cut:

 Bow with dovetail cut

 Bow with classic cut

7. Types of Bridal Veil (also called gypsophila, mist, white flowers):

Natural wedding veil

Stabilized ivory wedding veil

White artificial wedding veil

Further information:

• The circumference should be taken with a tape measure by passing it over the ears and about mid / high forehead. The tape measure should not press or tighten, but it should be loosened. We invite you to give a correct measurement of the circumference to avoid problems later. We remind you that the crown must not pierce through the head, but must be supported, you decide whether horizontally or obliquely.
• To select different types of bows, colors or types of ribbons, contact us via whatsapp at +39 3333653399 or email cdalloro2@gmail.com .
• For any information we will be happy to help you. 

Thank you,

The CDAlloro team

Here is a very useful guide to help you customize your Graduation Favors and fill out the pre-purchase phase. 

1. The processing times for an order for Favors are 48 working hours.

At the end of these hours, we will be able to send the favors, which will be delivered to you in 1/3 working days. 

2. Typology of red cards, without parchment / with parchment. 

3. The internal hand lettering is free, if you prefer printing there will be a surcharge of € 15 on the total cost. After the purchase you will be contacted to define the font. With the printed text you can write anything you want (name, faculty, degree, title, date ..) as the space available will be greater. 

Further information:

• All the favors are handmade by us and can be customized in the type and color of the ribbons. 
• Types of ribbons available: satin, tulle, organza, checked, polka dot, with the word "graduation". 
• The favors with the painting can be customized to your liking. You will have to provide us with the drawing, we will make the draft and we will send you the free estimate.  
• For any information we will be happy to help you.

Thank you, 

The CDAlloro team

To create our compositions we use a particular white flower called Bride's Veil or more technically Gypsophila / Gipsofila. 

During the months between October and May we only use freshly cut wedding veil (unless you require the stabilized or artificial one). Due to the high summer temperatures of the months of June, July, August and September we propose one of the alternatives proposed, Stabilized or Artificial Wedding Veil. This is to ensure greater conservation and beauty of the final result of the crown.

The stabilized gypsophila is ivory in color and smaller than the natural one (it is not dry!), but it will remain so forever, unlike the natural one which dries after 2/3 days. 

If you have any doubts, feel free to contact us via the whatsapp button and request examples. 

The change is free, does not involve any surcharge and is carried out automatically. 

Here is a very useful guide to help you customize the Laurel Wreath for Graduation and fill in the pre-purchase phase. 

1. Satin Ribbon Colors:

Available colors not shown in the photo: cream, candy pink.

2. Type of bow on the back of the crown:

 Simple 2-tailed bow

 Simple bow with 4 tails

 2-tailed bow

 Bow Elaborated with 4 tails

 Two-tone bow

 2-tailed cockade bow

 4-tailed cockade bow

 Bow Elaborated in satin and tulle / organza

 Bow Elaborated with 2-tailed curls

 Bow Elaborated with 4-tail curls

 Bow with color scale (minimum 3) in cockade

3. Presence of 2 ribbons on the sides of the Crown:

               Otherwise

4. Adding the bead on the bow:

5. Adding the charms (four-leaf clover or red pepper and metal tassel):

6. Bow with dovetails or classic cut:

 Bow with dovetail cut

 Bow with classic cut

7. Types of Bridal Veil (also called gypsophila, mist, white flowers):

Natural wedding veil

Stabilized ivory wedding veil

White artificial wedding veil

Further information:

• The circumference should be taken with a tape measure by passing it over the ears and about mid / high forehead. The tape measure should not press or tighten, but it should be loosened. We invite you to give a correct measurement of the circumference to avoid problems later. We remind you that the crown must not pierce through the head, but must be supported, you decide whether horizontally or obliquely.
• To select different types of bows, colors or types of ribbons, contact us via whatsapp at +39 3333653399 or email cdalloro2@gmail.com .
• For any information we will be happy to help you. 

Thank you,

The CDAlloro team

Here is a very useful guide to help you customize your Graduation Favors and fill out the pre-purchase phase. 

1. The processing times for an order for Favors are 48 working hours.

At the end of these hours, we will be able to send the favors, which will be delivered to you in 1/3 working days. 

2. Typology of red cards, without parchment / with parchment. 

3. The internal hand lettering is free, if you prefer printing there will be a surcharge of € 15 on the total cost. After the purchase you will be contacted to define the font. With the printed text you can write anything you want (name, faculty, degree, title, date ..) as the space available will be greater. 

Further information:

• All the favors are handmade by us and can be customized in the type and color of the ribbons. 
• Types of ribbons available: satin, tulle, organza, checked, polka dot, with the word "graduation". 
• The favors with the painting can be customized to your liking. You will have to provide us with the drawing, we will make the draft and we will send you the free estimate.  
• For any information we will be happy to help you.

Thank you, 

The CDAlloro team

To create our compositions we use a particular white flower called Bride's Veil or more technically Gypsophila / Gipsofila. 

During the months between October and May we only use freshly cut wedding veil (unless you require the stabilized or artificial one). Due to the high summer temperatures of the months of June, July, August and September we propose one of the alternatives proposed, Stabilized or Artificial Wedding Veil. This is to ensure greater conservation and beauty of the final result of the crown.

The stabilized gypsophila is ivory in color and smaller than the natural one (it is not dry!), but it will remain so forever, unlike the natural one which dries after 2/3 days. 

If you have any doubts, feel free to contact us via the whatsapp button and request examples. 

The change is free, does not involve any surcharge and is carried out automatically. 

Here is a very useful guide to help you customize the Laurel Wreath for Graduation and fill in the pre-purchase phase. 

1. Satin Ribbon Colors:

Available colors not shown in the photo: cream, candy pink.

2. Type of bow on the back of the crown:

 Simple 2-tailed bow

 Simple bow with 4 tails

 2-tailed bow